SPINNING PREPARATION | FLOWCHART OF SPINNING PROCESS | OBJECT OF MIXING | OBJECT OF BLOWROOM | OBJECT OF CARDING | OBJECT OF DRAWFRAME | OBJECT OF COMBER | OBJECT OF SIMPLEX.

DEFINITION OF SPINNING

The process of converting staple fibres ( like as cotton, polyester, nylon etc ) to continuous yarn, is called SPINNING.

PROCESS FLOWCHART OF SPINNING YARN

Spinning Process Flowchart

MIXING

OBJECT OF MIXING

• To feed the uniform amount of material in blowroom line.
• To get the better quality of yarn.
• To reduce the cost of raw material upto some extent.
• To combine two or more varieties of same fibres.
• To reduce the cost of product upto some extent.
• To produce mixed variety product.
• To add some extra moisture to raw material.
• To reuse some waste to fresh fibre.

BLOWROOM LINE

OBJECT OF BLOWROOM

• To open the bale fibres into small tufts.
• To clean the fibres by removing foreign matters such as seeds, sand, dust etc. and prepare the material for next process.
• To mix the different components of fibres to give a homogeneous mixing.
• To feed opened and cleaned material to chute feed system.

CARDING

OBJECT OF CARDING

• Carding should individualize the fibre.
• Clean the material by removing the foreign matter such as sand, dust, seed etc.
• Remove the neps.
• Form the continues strand of sliver.